|
|
For more detailed information call us at 888-809-FIRE or see BLACK DIAMOND 's website.
RUBBER FIREBOOTS
Not all rubber boots are made the same, Black Diamond Rubber Fire Boots provides all-day comfort and support.
|
STOCK #9203
|
STOCK #9451
|
STOCK #9470
|
STOCK #9301
|
STOCK #9460
|
|
 |
This Fire Hip-Boot provides the ultimate in protection.
|
|
|
 |
The Black Diamond Comfort Fit Form ("Last") used to construct these boots has been designed for maximum comfort and accurate fit. In addition, the Enersole System includes a high-density polyurethane midsole that absorbs energy. The second layer of comfort includes a single-density polyurethane orthotic footbed that provides all-day comfort. The footbed fabric cover absorbs perspiration and is removable for fast drying.
|
| Comfort System |
: Comfort Fit Plus - with Enersole |
| Boot Height |
: 16 inch |
| Upper Midsole |
: 2.0MM High Density Rubber with calendared fabric |
| Lower Midsole |
: 6.8MM Coated Felt |
| Insulation |
: 6.0MM Open Cell Foam |
| Leg Lining |
: Kevlar/Nomex with 1.2MM Coating |
| Leg Lining Stitch |
: Lining includes backstitch |
| Toe Lining |
: 1.4MM Net Lining Calendared Coated |
| Tibia Protection |
: 3.0MM Heavy Corrugated Roll |
| Steel Toe |
: ANSI - Z41-1999 Standard |
| Steel Midsole |
: Stainless Steel |
| Steel Shank |
: Triple Ridge Steel |
| Outsole |
: Molded Rubber K-Lug Design |
| Footbed |
: PU orthotic, fabric covered, removable |
| Pull-On System |
: Cotton Drill Friction Coated with Spread Cotton and Nylon Net |
| Certification |
: NFPA 1971 Edition Standard for Structural Firefighting |
|
|
 |
The Black Diamond Comfort Fit Form ("Last") used to construct these boots has been designed for maximum comfort and accurate fit. In addition, the Enersole System includes a high-density polyurethane midsole that absorbs energy. The second layer of comfort includes a single-density polyurethane orthotic footbed that provides all-day comfort. The footbed fabric cover absorbs perspiration and is removable for fast drying.
|
| Comfort System |
: Comfort Fit Plus - with Enersole |
| Boot Height |
: 16 Inches |
| Upper Midsole |
: 2.0MM High Density Rubber with calendared fabric |
| Lower Midsole |
: 6.8MM Coated Felt |
| Insulation |
: 6.0MM Open Cell Foam |
| Leg Lining |
: Kevlar/Nomex with 1.2MM Coating |
| Leg Lining Stitch |
: Lining includes Kevlar-thread backstitch |
| Toe Lining |
: 1.4MM Net Lining Calendared Coated |
| Tibia Protection |
: 3.0MM Heavy Corrugated Roll |
| Steel Toe |
: ANSI - Z41-1999 Standard |
| Steel Midsole |
: Stainless Steel |
| Steel Shank |
: Triple Ridge Steel |
| Outsole |
: Rubber Calendared with Griptread Design |
| Footbed |
: PU Orthotic Footbed, Fabric-covered, Removable |
| Pull-On System |
: Cotton Drill Friction Coated with Spread Cotton and Nylon Net |
| Certification |
: NFPA 1971 Edition Standard for Structural Firefighting |
|
|
 |
The Black Diamond Comfort Fit Form ("Last") used to construct these boots has been designed for maximum comfort and accurate fit. In addition, the Enersole System includes a high-density polyurethane midsole that absorbs energy. The second layer of comfort includes a single-density polyurethane orthotic footbed that provides all-day comfort. The footbed fabric cover absorbs perspiration and is removable for fast drying.
|
| Comfort System |
: Comfort Fit Plus - with Enersole |
| Boot Height |
: 16 Inches |
| Upper Midsole |
: 2.0MM High Density Rubber with calendared fabric |
| Lower Midsole |
: 6.8MM Coated Felt |
| Leg Lining |
: 3.0MM Wool Felt 1.6MM Coating |
| Leg Lining Stitch |
: Lining includes Kevlar-thread backstitch |
| Toe Lining |
: 1.4MM Net Lining Calendared Coated |
| Tibia Protection |
: 3.0MM Heavy Corrugated Roll |
| Steel Toe |
: ANSI - Z41-1999 Standard |
| Steel Midsole |
: Stainless Steel |
| Steel Shank |
: Triple Ridge Steel |
| Outsole |
: Molded Rubber K-Lug Design |
| Footbed |
: PU Orthotic Footbed, Fabric-covered, Removable |
| Pull-On System |
: Cotton Drill Friction Coated with Spread Cotton and Nylon Net |
| Certification |
: NFPA 1971 Edition Standard for Structural Firefighting |
|
|
 |
The Black Diamond Comfort Fit Form ("Last") used to construct these boots has been designed for maximum comfort and accurate fit. In addition, the Enersole System includes a high-density polyurethane midsole that absorbs energy. The second layer of comfort includes a single-density polyurethane orthotic footbed that provides all-day comfort. The footbed fabric cover absorbs perspiration and is removable for fast drying.
|
| Comfort System |
: Comfort Fit Plus - with Enersole |
| Boot Height |
: 16 Inches |
| Upper Midsole |
: 2.0MM High Density Rubber with calendared fabric |
| Lower Midsole |
: 6.8MM Coated Felt |
| Insulation |
: 6.0MM Open Cell Foam |
| Leg Lining |
: 3.0MM Wool Felt 1.6MM Coating |
| Leg Lining Stitch |
: Lining includes Kevlar-thread backstitch |
| Toe Lining |
: 1.4MM Net Lining Calendared Coated |
| Steel Toe |
: ANSI - Z41-1999 Standard |
| Steel Midsole |
: Stainless Steel |
| Steel Shank |
: Triple Ridge Steel |
| Outsole |
: Rubber Calendared with Griptread Design |
| Footbed |
: PU Orthotic Footbed, Fabric-covered, Removable |
| Pull-On System |
: Cotton Drill Friction Coated with Spread Cotton and Nylon Net |
| Certification |
: NFPA 1971 Edition Standard for Structural Firefighting |
|
|
|
